Home Plumbing System Basics

Home Plumbing System Basics
May 29 05:21 2018 Print This Article

Plumbing could be a trivial thing for most of us. Not even a concern in the least until our pipes start leaking or our water systems make weird noises, then we call in the emergency plumber that costs us a pretty penny where it could have been avoided and maybe even repaired ourselves if there was a basic understanding of the plumbing system in our homes.

Plumbing is based on basic laws of nature. It works with gravity, pressure and hydrostatics (the study of fluids in motion). Knowing how all these work together can actually save you money in the long run. Don’t just wait for the noises or the leaks before you take action. Educate yourself about plumbing and it will be a benefit to you. This article aims to help you with just the basic understanding, but you can further study and find out more.

The basic system in any home consists of two separate subsystems that forms the plumbing system. One brings fresh water into the house and the other takes the waste water out of the house. Water coming in needs pressure so that it can go to wherever it is needed. As it comes in it runs through a meter to register the amount that you use. The main valve is close to this meter and is used to stop the water flowing into your house. This is good to know in case of an emergency, so you can shut off the flow to your house as soon as possible, unless the problem is just at a sink or toilet, then you can turn off the individual stop valve to the problem area.

The main supply is cold water, so in order to get hot water it needs to pass through a heating system and then you have a hot water line. Also running through the house to all the outlets that require hot water. The heating system has a thermostat to maintain the temperature of the water going through the house.

Now for the outflow subsystem. You get sewer or septic systems, but the essentials are basically the same. The draining system doesn’t rely mainly on pressure like the inflow or supply system. When it comes to the drainage system its all about gravity. The piping is done in such a way that the waste is pulled along the sewer line by gravity into a sewage tank or to a treatment facility.

Now this basic run down might make it sound simple, but there is quite more to it. There are vents and traps and the like, which all form vital part of the entire system. Therefore, it is important to do a little homework and research to find out what the various components do and how they function. It could save you a lot of money in the process if you do learn to do the minor things yourself. A final note, do remember to turn off the main supply before you do any major water works in your house by yourself.

With all these complications you might encounter at home, it is important to hire the best plumber in your area like Local Plumbing Heroes the plumber in Sydney.

  Categories:
view more articles

About Article Author